

Schematic illustration · mixer and receivers simplified
-
01 · the mixer
It starts with the mixer.
Here: a Sound Devices 888, shown as a simple block. At the ends of its bars sit the “golf tees”, as Sound Devices calls them – that is where the rack attaches.
Photos on this site show the rack on Sound Devices 633, 833, 888, 442 and MixPre-6.
-
02 · wings
Wings dock to the golf tees.
The wings connect your Sound Devices mixer to the base. They get attached to the “golf tees”, fastened with two supplied screws.
Two mounting levels – long holes, 18 mm spacing. wings: 31 g · €39.90
-
03 · base216
The base spans the mixer.
216 mm with 23 × M4 threads at 9 mm spacing – so many SmallRig, Wooden Camera and Tilta components such as cold-shoe mounts and NATO rails can be mounted on it.
base216: 47 g · €39.90 · also as base288 with 31 × M4
-
04 · slotcam
Three slots, side by side.
A mount for all wireless microphone receivers in camera-slot format. Several slotcams can be built in a row and behind each other.
base216: up to 3 slotcams in a row + 3 behind. slotcam: 47 g · €39.90
-
05 · receivers
Receivers slide in.
Camera-slot receivers go into the slotcams, antennas on top. Attach pro audio gear from Sennheiser, Wisycom and many more to a Sound Devices mixer.
Shown in the size of a slot-in Wisycom MCR42S. Photos on this site show Wisycom MCR42 and MCR54 and Sennheiser EK 3041 receivers.
-
06 · every part
Everything in its place.
Taken apart once more, the mixer see-through: wings on the golf tees, base216, three slotcams, the receivers – and the M4 pan head screws with washers that hold it all together.
The required screws are included.
-
07 · bundle slotcam
Ready for the soundbag.
Mixer, rack and receivers as one solid unit – seen from above, the way it sits in the bag.
wings + base216 + 3 × slotcam · 226 g · €199.50 incl. VAT. Mixer and receivers not included.







